Raymarine ST60 Plus Depth Display, Award winning Instrument , extra large Digits, high quality wide viewing LCD display, simple operation, a reliable depth performance and accuracy Instrument with flexible mountings.
The ST60 Plus Depth Display instrument could be installed as a master display (master mode) Connected to a ST60 Plus compatible Transducer or as a repeater receiving data from another depth-calculating device connected to the SeaTalk data network like Raymarine autopilots, Raymarine Chartplotters and Fishfinders (multifunction displays), Radar and other navigation equipment. To use as a repeater, simply Plug and Play-connect to the SeaTalk network and configure the Instrument as a repeater (repeater mode).
The ST60 Plus Depth Display has a big and high contrast 92mm LCD display with extra-large 36mm sized bold digits that provide a better viewing angles for both day and with 3 levels of display-backlighting for night. The display is built in a waterproof case by IPX6 & CFR46 standards to provide reliable performance even in bad weather or under the most demanding conditions.
The Raymarine ST60 Plus Depth Display delivers reliable depth performance and accuracy. Depth display units can be chosen between feet (FT), meters (M) or fathoms (FA). The ST60 Plus depth Display range is from 2.6’ to 600’ (0.8 – 180 m) while current, maximum and minimum depth is displayed. Alarms can be defined for shallow water, deep water, shallow anchor and deep anchor. A keel and waterline offsets could be set according to your boat's characteristics and be displayed at any time.
Raymarine ST60 Plus Depth Display instrument offers convenient and flexible mounting method either surface mounted onto your console, dashboard or bulkhead, flush-instalation or a table-top Mounting.
The ST60 Plus Depth System comes complete with display unit, sun cover, SeaTalk and power cables, surface mount kit and complete instructions.
Raymarine ST60 Plus Depth Display
SKU: 0532
€0.00Price
Available LAST PIECE
Raymarine ST60 Plus Depth Display Features:
- Depth performance from 2.6'-600' (0.8-180m).
- Maximum and minimum depth display.
- Depth trend indicator.
- Adjustable display response.
- Extra-large digits with high contrast and wide viewing angle.
- Transducer, keel or waterline offset.
- Standard surface mount kit included, optional flush or bracket mounts available.
- Intuitive 4-button control layout.
- Expandable SeaTalk networking technology enables connection to Raymarine autopilots, multifunction displays, radars, chartplotters and fishfinders.
- Compatible with the wireless SmartController autopilot control and instrument repeater.
Raymarine ST60 Plus Depth Display Specifications:
Power Nominal voltage (volts DC) 12V systems Absolute voltage range 10 – 16 volts Power consumption (typical) mA 45mA Physical Overall dimensions (WxHxD) mm (standard bezel) 110x115x39 Mounting methods flush/surface/bracket Control type(s) 4 backlit buttons Display size and type 92mm segmented LCD Maximum character size 36mm Display lighting 3 levels plus off Connections SeaTalk 2 connections NMEA input and output (0183) option via E85001 PC (RS232) and RayTech interface option via E85001 Approvals EMC (Europe and FCC) Yes CE marked Yes Environmental Operating temperature range -15°C to +55°C Non-operating temperature range -25°C to +70°C Humidity up to 95% Waterproofing standard IPX6 & CFR46 Display Pages Depth data current/min/max Depth range (m) (transducer dependant) 0.8 to 180m (600') Depth offsets keel/waterline/transducer Depth alarms shallow/deep/anchor Depth units metre/fathom/feet Transducer alignment and calibration (master only) manual Additional Features Depth trend arrows Yes Autopilot Status Repeater Yes Soft Power Down Yes Adjustable Display Response Time Yes
